How can I update the firmware of my devices in GLM 5.x ?

After the installation of the recent version of GLM you always should make sure that the firmware of your GLM network adapter or 9320A, speakers and the subwoofers is up-to-date. Here is how you do it:
Select "Info" in the lower left corner of GLM's main window and click on one of the icons of your speakers or subwoofers. In the info panel select 'Firmware'.

Select the devices to be updated and click on 'Update.

Update_firmware_GLM_5.pngUpdate_firmware_GLM_5_02.png

To update the firmware of your GLM network adapter (GLM Calibration Kit) or your 9320A, please click on the icon in the middle of the grid. In the info panel you will see an 'Update' button if a new firmware is available. Click on it to start the update process. The 9320A will turn itself off and on again automatically.

 

Update_firmware_GLM_5_03.png

If you're using an old setup file from GLM 4, the adapter icon might still be located in the bottom left corner. 

Adapter_old_Position.png

Previous
Next
17075621092114

Was this article helpful?

10 out of 14 found this helpful

Contact Us

Submit a request
Let us know the details of your request
Chat with us via widget
Available weekdays - 7am to 3pm GMT+2 /(DST+3)