On a selected loudspeaker, in the 'Network' tab the network related settings are displayed. The 'Mode' indicates whether the IP Address is assigned automatic or static. To manually change the IP Address, 'static' must be first selected.

By default, the loudspeakers are set to 'automatic' mode. When there is a DHCP server on the network, the loudspeaker will use an IP Adress assigned by the DHCP server. When no DHCP is found, then the loudspeaker uses an auto-IP in the IP address range 169.254.xx.xx.

To apply any changes, 'Apply and boot' must be clicked.